Fusion Strip-Lagg is the only strip lagging available with a bonding layer. Available in an overall thickness of 1/2" & 3/4" it will dramatically reduce your drop/waste by allowing you to use exactly the pulley width each time. Unlike other strip lagging you do not have to buff the back and cement it to achieve a because StripLagg already has the bonding layer on!
A large diamond profile material provided in 12" wide strips and 50' long rolls. It is offered in a standard SBR blend and also in a flame resistant compound. It has a gray bonding layer which provides superior pulley adhesion.
Driven head pulleys on high tension steel cable or fabric belts - is extremely aggressive.
| Properties | ||
|---|---|---|
| Color | Black | |
| Elastomer | NR/BR | |
| Tensile Strength | 2700 psi | DIN 53504 |
| Elongation At Break | 450% | DIN 53504 |
| Density | 1.10 g/cm³ | DIN 53505 |
| Hardness | 60 Shore A | DIN 53505 |
| Abrasion Resistance | 600 mm³@10 N | DIN 53516 |
| Groove Dimensions | 10mm x 8mm | 3/16" x 1/8" |
| Diamond Dimensions | 50mm x 75mm (2" x 3") |
| Thickness/Guage | Width | Length | Roll Weight | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Product Code | Frac | in | mm | in | mm | ft | m | lbs | kg |
| Standard | |||||||||
| FL-INSCN-5050 | 1/2 | .50 | 12 | 12.25 | 315 | 50 | 15.25 | 134 | 61 |
| FL-INSCN-7550 | 3/4 | .75 | 19 | 12.25 | 315 | 40 | 12.20 | 170 | 77 |
| Flame Resistant | |||||||||
| FL-INSCN-5050FR | 1/2 | .50 | 12 | 12.25 | 315 | 50 | 12.20 | 148 | 67 |
Note: 3/4" Lagging is special and not a stock item.